Why has my train stopped?
If you apply too much power, the train will cut the power to the motors to protect them from burning out. To rectify this, drop the tap selector to 0 and close the master circuit breaker (MCB), you'll hear the locomotive come back to life, and you'll be able to reapply power. You don't need to stop.
You can see this in action here, and how to recover in our Preview Stream.
How do I change the destination blind on the n-Wagen?
Use the handle above the driver's seat to change the destination blind.
- Bahnstrecke Bremen - Oldenburg Preview
- BR 155 Loco Showcase
- DB BR 425 Loco Showcase
- BR 110.3 Loco Showcase
- Bahnstrecke Bremen - Oldenburg trailer
- Bahnstrecke: Bremen - Oldenburg Route Introduction
- Bnrdzf 463 n-Wagen Introduction
- BR 110 Introduction
- BR 155 Introduction
- BR 425 Introduction